Description

Skeleton KeyTM only use 316LVM surgical steel for ALL plugs and bondage (“Skeleton Key – safe to put in”TM). Highly polished shiny, medical grade 316LVM surgical steel, hypoallergenic.

Hollow, allowing everything to flow right along.
Will come with special preserving powder inside – need to be cleaned before use with any thick thread and alcohol

Product Description:
TOTAL 3 3/4″ long.
5/16″ thick
It has 2 Detachable balls
– Large 9/16″ in diameter
– Small 3/8″ in diameter
refer to the photo measurements: CUP >9/16 Diameter
A= 3 1/8″
B= 0.5″
C = 0.25″

The Prince’s Wand is a particularly unusual piece of jewelry.
It consists of a hollow tube with a threaded cap at the end. The tube is inserted into the urethra, and a stem is inserted through a Prince Albert piercing and into another threaded hole on the side of the tube.
The little side stem holds the tube in place.
The threaded cap, often just a ball, can be removed so the wearer can urinate through the hollow tube without having to remove the jewelry (from the Prince Albert piercing).

Most PA Wands are held in place by a Prince Albert piercing, but any urethral piercing can be used

PA Wands are somewhat uncommon.
Difficult to manufacture or procure, they are most popular among men who enjoy urethral play, or sounding.

If similar item sold without an AUTHENTICITY charm OR IMPORTED, you probably received NOT a Skeleton KeyTM product (Fake), so it’s quality and proper functioning can not be guaranteed .

PUT SOMETHING BETTER INSIDE!

Total Overall Length: 3 3/4″ , Insertable Length: 2 inch / 55mm
Difficult to manufacture or procure, they are most popular among men who enjoy urethral play, or sounding.
316LVM surgical steel
Made in US (if shipped out of US – you received a fake or counterfeit item)
Comes in Skeleton Key Gift pouch with an AUTHENTICITY charm